Zn-Al—Mg-RE高速电弧喷涂工艺过程的氧化行为分析

为分析高速电弧喷涂工艺制备Zn-Al-Mg-RE防腐涂层的氧化行为,通过XRD、SEM和EDS试验探究了喷涂工艺对该涂层氧化物的组成、含量及其形态的影响规律,并测试了涂层的中性盐雾腐蚀性能。结果发现：该涂层具有典型的层状结构特征,在相互叠加的扁平颗粒之间有很薄的氧化物膜,同时在扁平颗粒的内部也非均匀地分布着富氧化物区,XRD显示这些氧化物主要为ZnO2和尖晶石结构的ZnAl2O4与MgAl2O4等。分析认为：喷涂时液态金属熔滴在高速气流剪切力作用和反应热梯度作用下,加剧了Zn-Al-Mg-RE熔滴的氧化,这些交错分布的氧化物对合金相产生了较好的屏蔽效果,从而提高了涂层的耐蚀性能。     

AZ91D镁合金表面纳米TiO_2复合微弧氧化层耐蚀性能研究

为了提高AZ91D镁合金微弧氧化陶瓷层的耐蚀能力,采用Na2SiO3电解液,添加入纳米TiO2,经微弧氧化,纳米TiO2颗粒复合入陶瓷层中,形成表面质量良好的纳米复合陶瓷质氧化膜。通过与普通微弧氧化陶瓷层比较,结果表明：纳米TiO2复合微弧氧化陶瓷层孔隙率降低,致密性提高,抗盐雾腐蚀性能提高1倍以上。     

潜艇内置隔板流体特性

为了探究隔板对隔舱特性的影响,以带流水孔潜艇内置隔板为研究对象,对潜艇内置隔舱设置不同的隔板数目,基于大涡模拟(LES)方法进行三维仿真模型进行数值模拟,分析内置隔板对潜艇隔舱阻力以及流噪声特性的影响。结果表明,内置隔板与流体的作用直接影响隔舱的整体特性。隔板数越多,隔舱阻力越大,噪声级也越高,并且阻力以及流噪声与来流速度呈正比例关系,这为潜艇内置隔板的设计提供了参考。     

基于梯度迭代法的一类追逃对抗模型研究

针对一类追逃对抗问题,基于微分对策理论,建立了三维空间中的追逃对抗模型,进而得到了最优性条件和最优策略.运用梯度迭代法给出了模型的数值解,并做了实例分析.分析结果显示,该模型可以很好地应用于潜艇对潜艇、潜艇对水面舰艇等实际追逃对抗问题.     

基于预配装思想的物资混装配载优化策略

提出了一种基于预配载思想的装备物资混装配载策略,并应用模糊聚类和混合智能算法进行了实例仿真。研究对于组合优化策略在装备保障信息化系统建设中的应用具有积极意义。     

箱装物资装运模型的构建及提货可视化设计

以汽车为例介绍了物资装载时横装、顺装和混装等几种模型,并对其算法进行了归纳。设想了一个以物资出入库为原型的可视化系统,并以建立的装运模型为基础,设计了可视化提货系统的实现过程。     

极性基团对环氧树脂基体力学性能及吸水特性的影响

研究了CYD- 128/THPA/DMP- 30 (CTD)、TDE- 85/THPA/DMP- 30(TTD)、CYD- 128/IPDA(CI)与TDE- 85/IPDA (TI)4种环氧树脂基体浇铸体的拉伸、弯曲和耐海水性能,分析了树脂、固化剂类型和分子结构对树脂基体性能的影响.结果表明,使用相同固化剂时,TDE...     

多孔介质中气体流量对流动阻力影响的实验研究

对空气在多孔介质(Pd/SiO2颗粒催化剂)中的流动阻力特性进行了冷态实验,研究了气体流量对流动阻力的影响.结果表明:催化剂厚度一定时,随着气体流量增大,多孔介质中的流动阻力也逐渐增大.经过与经典阻力计算公式对比,分析了偏差影响因素.最后,结合实验数据拟合出了适合管式反应器中流动阻力计算的半经验公式,能精确地预测颗粒填...     

Quay crane scheduling at container terminals to minimize the maximum relative tardiness of vessel departures

In this paper, we study the problem of scheduling quay cranes (QCs) at container terminals where incoming vessels have different ready times. The objective is to minimize the maximum relative tardiness of vessel departures. The problem can be formulated as a mixed integer linear programming (MILP) model of large size that is difficult to solve directly. We propose a heuristic decomposition approach to breakdown the problem into two smaller, linked models, the vessel‐level and the berth‐level models. With the same berth‐level model, two heuristic methods are developed using different vessel‐level models. Computational experiments show that the proposed approach is effective and efficient. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Influence of thickness and projectile shape on penetration resistance of the compliant composite

The present study deals with development of conceptual proof for jute rubber basedflexible composite block to completely arrest the projectile impacting the target at high velocity impact of 400 m/s through numerical simulation approach using finite element (FE) method. The proposed flexible composite blocks of repeating jute/rubber/jute (JRJ) units are modelled with varying thickness from 30 mm to 120 mm in increments of 30 mm and impacted by flat (F), ogival (O) and hemispherical (HS) shaped projectiles. All the considered projectiles are impacted with proposed flexible composite blocks of different thicknesses and the penetration behaviour of the projectile in each case is studied. The penetration depth of the projectile in case of partially penetrated cases are considered and the effect of thickness and projectile shape on percentage of penetration depth is statistically analyzed using Tagu-chi's design of experiments (DOE). Results reveal that the though proposedflexible composite block with thickness of 90 mm is just sufficient to arrest the complete penetration of the projectile, considering the safety issues, it is recommended to use theflexible composite with thickness of 120 mm. The nature of damage caused by the projectile in the flexible composite is also studied. Statistical studies show that thickness of the block plays a prominent role in determining the damage resistance of the flexible composite.